The problem
Stains from food, oils, sunscreen and organic liquids not only affect our appearance but can irreparably damage our clothes, sofas, carpets and furniture. In many cases the use of chemicals or strong cleaning agents is prohibited by the manufacturer itself. So how can a fabric be protected before it gets stained?
Solution
SurfaPore H is an innovative water-based product that is easily applied to cotton and leather fabrics without affecting their original appearance.
It effectively protects and waterproofs furniture upholstery, carpets, curtains and fabric-covered surfaces, chemically repelling water and dirt.
Food and oil stains are unable to penetrate and stain SurfaPore® H coated surfaces, so stains are easier to remove, surfaces are harder to stain and their clean appearance lasts longer.
Application
The surface before application should be clean, free of greasy stains and dry. Before application, shake the product well. Can be applied with a brush, roller or spray. For cotton fabrics, the dipping method may be used, with a dipping time of 0,5 to 10 minutes.
Apply to skin in a circular motion using a clean, lint-free cloth and remove excess material. In any case, it is recommended to test on a small surface before final application. No need for dilution. For very absorbent surfaces, reapply within 1 hour. Protection is fully achieved 24 hours after application.
Coverage: 8-15 m2 /L depending on the absorbency of the application surface.