The problem
Limestone absorbent marbles and cementitious surfaces are considered complex but vulnerable floor surfaces. They can be used indoors and outdoors. Their daily use can cause stains that aesthetically degrade these sensitive surfaces. In addition, oil stains can penetrate to such a depth that it is impossible to remove them.
The Solution
Surfapore M not only protects these surfaces from stains but also converts them into water-repellent and oil-repellent surfaces. Surfapore M covers the pores of surfaces without altering their appearance and activates them to repel oily stains. Therefore, a double action is achieved:
- Passive protection by covering the surface of the resources.
- Active oil repellency.
An ideal effective shield.
Surfapore M is an aqueous-based formula specially designed to harness the power of nanotechnology to waterproof and protect the surfaces to which it is applied from oily stains. The core of the nanoparticles, specially designed to fit into the pores of surfaces to be protected, penetrate and fill pores that can accumulate water oil and dirt. Surfapore M is anchored to the application surface resulting in the creation of a permanent and effective coating. After coating, water, oil and dirt are unable to penetrate the porosity of the surface.
Application method
Surface application: It is recommended that the application surface is clean and dry. With a brush, roller or spray gun, cover with Surfapore M, without dilution. For extra protection, apply a second coat within 3 hours of the first.
Application by immersion: Recommended for highly absorbent surfaces and floor surfaces to reduce the mobility of ions and efflorescence on all sides. The immersion time should not exceed 2 minutes and the surfaces should be sufficiently dry before application.
Estimated duration of implementation
At least 3 years, after proper application.